Also called: Autoclave, Steriliser, Sterilizer, Mesin Autoklaf

Autoclave & Medical Steriliser Supplier in Malaysia

Autoclave machines and steam sterilisers for GP clinics, dental practices, laboratories, aesthetic and tattoo studios — matched to your load, quoted in writing, delivered and installed nationwide by AA Alive.

WhatsApp for a quote Call 011-2879 9609

Last updated: 5 October 2026

Class B cycle, chamber pressure over time (illustrative)

EN 13060 tabletop classes explained and quoted: Class B, N and S
From compact tabletop to vertical lab autoclaves: 8–150 L
Batu Caves, Kota Kinabalu and Kuching: 3 branches
Every steriliser we quote for medical instruments: MDA-registered

Who we supply

What an autoclave does

An autoclave is a steam steriliser: it holds instruments in saturated steam under pressure until every microorganism, including bacterial spores, is killed. “Autoclave”, “steriliser”, “sterilizer”, “steam sterilizer” and “mesin autoklaf” all describe the same machine in a clinic.

134 °C cycle

The standard fast cycle: about 2.1 bar of steam pressure and at least 3 minutes at 134 °C. Used for most wrapped and unwrapped metal instruments.

121 °C cycle

A gentler cycle of at least 15 minutes at 121 °C, used for items that tolerate heat but not 134 °C, such as some plastics, rubber and textiles.

Drying matters

A full cycle — air removal, heat-up, hold, exhaust and drying — usually takes 30 to 60 minutes. Wet packs are not considered sterile, so drying performance is worth comparing.

Types of autoclave and steriliser

Pick the type from what you reprocess, not from the price tag.

Common steriliser types sold in Malaysia
Type	Best for	What it can process	Typical size
Class B tabletop autoclave	Dental, GP, aesthetic, surgical	Wrapped, porous and hollow loads (handpieces, cannulae)	17–23 L
Class N tabletop autoclave	Simple clinics, beauty and tattoo studios	Unwrapped solid instruments only	8–18 L
Class S tabletop autoclave	Mixed loads named by the manufacturer	Whatever the maker has validated it for	12–23 L
Vertical (top-loading) autoclave	Laboratories, universities, factories	Media, liquids, glassware, waste	35–150 L
Dry-heat (hot-air) steriliser	Heat-stable metal and glass	Items that must stay dry	Small cabinets
Low-temperature (EO / plasma)	Hospital CSSD	Heat-sensitive devices	Floor-standing

Class B, N and S — which one you need

European standard EN 13060 sorts small steam sterilisers (chambers up to 60 litres) into three classes by the loads they are proven to sterilise.

Class B

Uses a fractionated pre-vacuum to pull air out of hollow and porous items, so steam reaches inside handpieces, lumens and wrapped packs. If you sterilise anything wrapped or hollow, you need Class B.

Class N

Removes air passively. Only proven for unwrapped, solid instruments that are used immediately. Cheaper, but not suitable for pouched instruments you store.

Class S

Validated by the manufacturer for specific load types between N and B. Read exactly which loads are covered before buying.

How to choose an autoclave for your clinic

Count your instruments per day and per batch — chamber volume (litres) and tray count must cover your peak session, not your average.
List what is hollow or wrapped. Dental handpieces, suction tips and pouched kits all need a Class B cycle.
Check the water system: most units need distilled or deionised water; some accept a water purifier connection.
Ask for cycle times with drying for a full load, not the fastest empty-chamber figure.
Ask how cycles are recorded — printer, USB or data logger — because you will need records for audits.
Confirm power and bench space. Large tabletop units can draw over 2 kW and need clearance for ventilation.
Ask who services it, how fast, and the price of door seals, filters and annual calibration.
Ask for the MDA registration number for a steriliser sold for medical instruments.

Proving every load is sterile

Physical

Time, temperature and pressure for every cycle, printed or logged. This is your first line of evidence.

Chemical

Indicator tape and pouch indicators only show a pack went through a cycle. Integrator strips (ISO 11140-1 types 5 and 6) inside packs check time, temperature and steam together.

Air-removal test

Vacuum (Class B) sterilisers are checked with a Bowie-Dick or helix test, typically at the start of each day.

Biological

Spore tests with Geobacillus stearothermophilus are the definitive check, commonly run weekly and after repairs. Follow your facility’s infection-control policy.

MDA registration and your steriliser

Under the Medical Device Act 2012 (Act 737), a medical device must be registered with the Medical Device Authority (MDA) before it is imported, exported or placed on the Malaysian market. A steriliser sold for reprocessing medical instruments is itself a medical device, so ask for its MDA registration number and check it on the MDA’s public register before you pay.

How we quote

You tell us your practice type, daily instrument count, what is hollow or wrapped, and your location.
We shortlist suitable classes and chamber sizes and explain the trade-offs.
You get a written quotation listing the unit, delivery, installation, training, warranty and consumables separately.
After installation we can help with your first Bowie-Dick and spore tests and set up cycle records.

How to buy an autoclave in five steps

The order we work through with every clinic and lab, so the machine fits the load rather than the brochure.

Count your load
List the instruments you reprocess in your busiest session, and which are hollow, porous or pouched.
Choose the class
Wrapped or hollow loads need Class B; unwrapped solid instruments used at once can use Class N.
Size the chamber
Match chamber litres and tray count to the peak session, with room for steam to circulate.
Compare written quotes
Compare like for like: class, volume, warranty, records, installation, service and MDA registration.
Install, test and record
Install, run the first Bowie-Dick and spore tests with your staff and set up cycle records.

Buyer’s guides

Autoclave Machine: Types, Sizes and How to ChooseA plain guide to the parts, cycles and sizes of a clinic or laboratory autoclave machine, written for buyers in Malaysia.Medical Steriliser (Sterilizer) Machines for ClinicsSteam, dry heat, UV, plasma and ethylene oxide sterilisers compared — and how to tell which one your clinic’s instruments require.Steam Sterilizer: How Steam Sterilisation WorksTemperatures, pressures, air removal and the common reasons a steam sterilisation load fails — explained for clinic and CSSD buyers.Class B Autoclave vs Class N and Class SThe EN 13060 classes decide which loads your autoclave can legitimately sterilise. Here is what each class covers and how to tell them apart.Dental Autoclave for Malaysian Dental ClinicsWhy dental clinics need a Class B autoclave, how to size it by chairs and patients, and the daily routine that keeps handpieces safe.Laboratory Autoclave: Vertical and Benchtop Lab AutoclavesChoosing a lab autoclave for culture media, glassware, liquids and biohazard waste — sizes, cycles and the services your room needs.Autoclave Price in Malaysia: What Drives the CostWe do not publish a price list, because the right number depends on your configuration. Here is everything that moves the price, so you can compare quotes fairly.Autoclave Testing: Bowie-Dick, Indicators and ValidationThe daily, weekly and yearly checks that prove your autoclave is sterilising — and what autoclave tape and pouches can and cannot tell you.Autoclave Maintenance: Daily, Weekly and Annual ChecklistMost autoclave failures start with water, seals or skipped tests. This checklist keeps a clinic or lab steriliser passing — and lasting.Clinic Sterilisation Room Setup: Dirty-to-Clean WorkflowAn autoclave only sterilises what has been properly cleaned and packed. Here is how to lay out a clinic reprocessing area that works.Autoclave for Beauty, Nail and Tattoo StudiosReusable metal tools that break skin need real sterilisation. Here is how studios choose a compact autoclave — and when a UV box is not enough.

Autoclave & Steriliser Supplier in your city

We quote, deliver and install across Peninsular Malaysia from our Batu Caves headquarters, and across Sabah and Sarawak from our Kota Kinabalu and Kuching branches.

Key terms explained

Autoclave: A steriliser that uses saturated steam under pressure to kill all microorganisms, including spores.
Air removal: Getting air out of the chamber and load so steam can touch every surface — by vacuum pulses or steam displacement.
Biological indicator: A test containing resistant bacterial spores (Geobacillus stearothermophilus) that shows whether a cycle actually killed them.
Bowie-Dick test: A daily test pack for vacuum sterilisers that shows whether air removal and steam penetration are working.
Chemical indicator: A strip or ink that changes colour when exposed to sterilising conditions; types 1–6 under ISO 11140-1 differ in how much they prove.
Class B: EN 13060 class for small sterilisers proven on wrapped, porous and hollow loads, using fractionated pre-vacuum.
Class N: EN 13060 class proven only for unwrapped solid instruments, using passive air removal.
Class S: EN 13060 class for the specific load types the manufacturer has validated.

Full glossary of 20 terms Every question answered

More clinic equipment from AA Alive

hematologyanalyser.myHaematology analyser (FBC machine) — hematologyanalyser.my ultrasound.myUltrasound machine supply — ultrasound.my oxygen-concentrator.myOxygen concentrators — oxygen-concentrator.my

Frequently asked questions

What is the difference between an autoclave and a steriliser?

An autoclave is a type of steriliser that uses pressurised steam. In clinics the two words are used for the same machine; “sterilizer” is the American spelling of “steriliser”.

Which autoclave do dental clinics need?

A Class B autoclave. Dental handpieces are hollow and instruments are usually stored in pouches, and only a Class B vacuum cycle is proven to sterilise those loads.

What size autoclave should a GP clinic buy?

Most GP clinics are well served by a 17 to 23 litre tabletop unit. Count the instruments in your busiest session and check they fit the trays with room for steam to circulate.

How long does an autoclave cycle take?

Typically 30 to 60 minutes for a full cycle including drying. The hold time itself is at least 3 minutes at 134 °C or 15 minutes at 121 °C.

Is a UV steriliser cabinet enough for clinic instruments?

No. UV cabinets do not reliably sterilise instruments, especially surfaces in shadow, lumens or inside pouches. Instruments that enter sterile tissue need steam sterilisation or another validated sterilisation method.

What water should I use in an autoclave?

Distilled or deionised water with low mineral content, as specified by the manufacturer. Tap water leaves scale that damages valves and stains instruments.

Do autoclaves need to be registered in Malaysia?

A steriliser sold for reprocessing medical devices is a medical device and must be registered with the Medical Device Authority before it is placed on the market. Ask the supplier for the registration number.

Do you publish autoclave prices?

No. The price depends on class, chamber size, brand, accessories and the exchange rate on the day, so we quote in writing for your exact configuration.

Get a written quotation

Tell us your clinic or lab type, daily workload and location. We match suitable models and send a written quotation with delivery, installation and training spelled out.

WhatsApp us